Tachometer...
#1
Newbie
Thread Starter
Join Date: Jul 2007
Location: Los Angeles
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Tachometer...
My tach doesnt work, i just but this fc and he told me it was a blown fuse. Does anyone know were the tach fuse is located, i already check the one thats under the dashboard but still no luck.
#3
(blank)
iTrader: (1)
If all the other gauges work, this will confirm the above. There is no fuse just for the tach. Could be the wire or connection to the trailing coil (near the back) is bad, or even the plug/connection/solder near the cluster. More likely, though, it is the tach itself, but check the other stuff first.
I'll have to check your profile to be sure (specify year, NA or turbo next time), but if it's an s4, you should be able to pick up a tach cheap to swap in.
Edit: Well, your profile says 1989 FC3S (I'm assuming non turbo), but you should still be able to find a spare cluster. The clusters disassemble such that you can replace just the tach or swap the whole thing. Tip: Try the gauges before you screw the black surround back in.
I'll have to check your profile to be sure (specify year, NA or turbo next time), but if it's an s4, you should be able to pick up a tach cheap to swap in.
Edit: Well, your profile says 1989 FC3S (I'm assuming non turbo), but you should still be able to find a spare cluster. The clusters disassemble such that you can replace just the tach or swap the whole thing. Tip: Try the gauges before you screw the black surround back in.
Last edited by pfsantos; 08-16-07 at 08:22 AM.
Thread
Thread Starter
Forum
Replies
Last Post