T2 LIM orings
03-14-03, 12:59 AM
#1
White Comet
Thread Starter
Join Date: Jan 2002
Location: Orange County
Posts: 2,145
Likes: 0
Received 0 Likes
on
0 Posts
T2 LIM orings
Well I started reassembling everything today and I tried getting the orings on the lower manifold in place but they wont fit in that little opening?? 
I didnt replace the orings cause they looked to be in almost perfect condition but is it possible they expanded? Are they supposed to fit in the little opening? On the manifold or block side of the gasket? Thanks in advance.
I didnt replace the orings cause they looked to be in almost perfect condition but is it possible they expanded? Are they supposed to fit in the little opening? On the manifold or block side of the gasket? Thanks in advance.
03-14-03, 12:40 PM
#4
Senior Member
Join Date: Feb 2001
Location: Roanoke
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Besides....they are cheap and a pain in the *** to replace. You might as well replace them while you have them out. I used hylomar to hold them in place, seemed to work well.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM