t2 cranks, but wont start
#1
Junior Member
Thread Starter
Join Date: Oct 2006
Location: phoenix, az
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
t2 cranks, but wont start
so heres the deal currently: i have an 88 t2 with a streetport and de-emissioned. the previous owner was running megasquirt and thus it was not running terribly well. so i converted it back to stock. replaced the old injectors, put in a stock ecu, and reinstalled a stock wiring harness. now, i am forced to run an MAF because im not running the squirt anymore. compression testing yields about 80 all the way around, so the motor should be good. I am getting spark from both coils,new plugs, and the engine is grounded properly. getting fuel, pressure seems good. replaced the cas and timing seems to be on. i thought i might be flooding it out, so i unplugged the pump and cleared it a couple of times. i also removed plugs to clear it a couple of times.
I have gone through every connection, wire, and component i can, but it still will only crank. the engine is deemissioned. i didnt do it, but i checked it against diagram and instructions on rotaryressurection.com and everything seems up to par. im currently wondering if anyone has any ideas. im desperate and tried everything i can so anything help would be much appreciated.
I have gone through every connection, wire, and component i can, but it still will only crank. the engine is deemissioned. i didnt do it, but i checked it against diagram and instructions on rotaryressurection.com and everything seems up to par. im currently wondering if anyone has any ideas. im desperate and tried everything i can so anything help would be much appreciated.
Thread
Thread Starter
Forum
Replies
Last Post