T04e turbo rebuilt kit.
#1
Senior Member
Thread Starter
iTrader: (8)
Join Date: Mar 2007
Location: scranton Pa
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
T04e turbo rebuilt kit.
I need a rebuilt kit for my turbo. I've see a few on ebay and wondering if that's a good idea. If not is there another place where I can get a rebuilt kit for this turbo? Also is this something I do myself. I wouldn't need any special equipment. Thanks
#2
Turbo power, activate!
iTrader: (7)
look at gpopshop.
I used their kit for all my turbos.
The ebay kit should do fine but I never had experience with them.
You will need a snap ring plier to remove the snap rings, and replace the journal bearings.
Look at this here
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/how-rebuild-stock-ht-18-turbo-build-hybrid-959045/
Its the same thing, but instead of a stock turbo, you are doing it to a t4 compressor housing. Same procedure. You will also have to get it balanced if you are taking it apart, unless you marked it before dissasembly and aligned it back correctly
I used their kit for all my turbos.
The ebay kit should do fine but I never had experience with them.
You will need a snap ring plier to remove the snap rings, and replace the journal bearings.
Look at this here
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/how-rebuild-stock-ht-18-turbo-build-hybrid-959045/
Its the same thing, but instead of a stock turbo, you are doing it to a t4 compressor housing. Same procedure. You will also have to get it balanced if you are taking it apart, unless you marked it before dissasembly and aligned it back correctly
Thread
Thread Starter
Forum
Replies
Last Post