swapping chassis
#1
Junior Member
Thread Starter
Join Date: Dec 2006
Location: soldotna, alaska
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
swapping chassis
has anybody swapped a TII s5 engine/tranny/wiring harness/ecu into a n/a s4 chassis? if so please help me on what i'm going to need to effectively do this swap, or if you have any info on how to do it please private message me and let me know thank you in advance
#2
Rotary Enthusiast
I did the exact same swap. I used a jdm front clip. It was alot of work but it wasn't too much trouble. The main things I had to consider was fabing my own tranny mounts and rewiring the rear since the s4 wiring is different on an S5.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
jakeishness
2nd Generation Specific (1986-1992)
11
09-11-15 11:33 AM