2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Suspension/Body problems.

Thread Tools
 
Search this Thread
 
Old Jul 28, 2005 | 10:52 AM
  #1  
JamesBong's Avatar
Thread Starter
Yes, that is my name.
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 519
Likes: 0
From: Santa Cruz Mtns
Suspension/Body problems.

So, I drive a super twisty road every day on my commute. (one lane wide, lots of second gear hair pins) I have replaced alot of the basic suspension components to stiffen the car up for better handling. The problem is that now I get some nasty creaking sounds from the rear of the car on this road, and now on any road when the seven has been sitting in the sun on a hot day. Is this due to excessive body flex? How do I fix this? It's sounding like something is not good.
Reply
Old Jul 28, 2005 | 11:04 AM
  #2  
RETed's Avatar
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
Hatch not closed tightly?
You might want to adjust the two latches to see if this helps?


-Ted
Reply
Old Jul 28, 2005 | 11:20 AM
  #3  
emac's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2004
Posts: 448
Likes: 0
From: MA/NJ
how are your bushings doing? After 15+ years they start to deteriorate.
Reply
Old Jul 28, 2005 | 11:27 AM
  #4  
WonkoTheSane's Avatar
Green Flameless
Tenured Member 15 Years
iTrader: (2)
 
Joined: Feb 2002
Posts: 2,242
Likes: 0
From: North Central PA
or, if you replaced your bushings, you do realize that they can need to be oiled, right?
Reply
Old Jul 28, 2005 | 12:11 PM
  #5  
YearsOfDecay's Avatar
Locust of the apocalypse
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 2,553
Likes: 2
From: Directly above the center of the earth (York, PA)
1) Wonkos right.. if you replaced the bushings with poly and didn't grease 'em... El Squeeko profuso..

2) My Hatch started squeakin like a bitch after i did my AGX/Eibach install,,, My solution was to wrap a couple turns of electrical tape around the middle of the latch loops.. solved the problem lickity split!
Reply
Old Jul 28, 2005 | 12:38 PM
  #6  
JamesBong's Avatar
Thread Starter
Yes, that is my name.
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 519
Likes: 0
From: Santa Cruz Mtns
I used the grease from the energy kit when I installed the bushings. Man, that's some stickey crap! I didn't grease the UHMW rear diff and subframe bushings from MMR when I installed them. Would they need grease too? The creaking definately seems to be comming from the inside though. I'll check the hatch and get back.

Thanks for all the help.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
scissorhands
New Member RX-7 Technical
5
Oct 8, 2015 01:17 PM
andernamen
1st Generation Specific (1979-1985)
4
Sep 27, 2015 03:32 AM
erevos
2nd Generation Specific (1986-1992)
4
Sep 15, 2015 09:19 AM
sinistersam
New Member RX-7 Technical
5
Sep 13, 2015 07:17 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM




All times are GMT -5. The time now is 06:34 AM.