Wondering if anyone has installed this and can give me a few tips on installing them...YES I DID A SEARCH!!!!

Thanks for any responses.

Mike

 

http://www.nopistons.com/forums/inde...howtopic=52132

https://www.rx7club.com/showthread.p...ht=super+angle

https://www.rx7club.com/showthread.p...ht=super+angle

https://www.rx7club.com/showthread.p...ht=super+angle

https://www.rx7club.com/showthread.p...ht=super+angle

http://www.nopistons.com/forums/inde...hl=super+angle

http://www.nopistons.com/forums/inde...hl=super+angle

https://www.rx7club.com/showthread.p...ht=super+angle



UPDATE: oh I just read your looking for install tips.... I donno if any of those have install in them but I really don't care at this point. Can't be that hard. :P

If you can't figure out out you can send it to me and I'll ... test fit... it on mine.

 

which kit and where and how much

thanks
Bryon

 

yeah theres all thoes but if you look at them and read them none of them have anything on howto install them or any tips on how to do it...I also want pics...thoes links had nothing I was looking for except the japanese one

 

from what ive heard, old **** off, cut 10mm off tie rod thread, install new ****, get aligned.

that said, mine is still in the box waiting for my lazy *** to get around to figure out how all that crazy steering stuff comes apart.

 

Well, if it has the spacers for the tie rods, you have to take the tie rods off, place the spacers in, then screw the tie rods on top. For the tie rod ends you just take the stockers off and place the new Super Angle Tie Rod Ends on, should be as simple as that.