2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

sunroof question

Thread Tools
 
Search this Thread
 
Old Aug 20, 2008 | 11:59 PM
  #1  
connors14's Avatar
Thread Starter
ROTOR > PISTON
iTrader: (2)
 
Joined: Jun 2008
Posts: 143
Likes: 0
From: milford, connecticut
Question sunroof question

ok so my sunroof wont go down. the motor still works fine. the driver side mount from the sunroof to the track is broken.

i was wondering if i can get that part or i have to get the whole assembly?

sorry if this was covered before.
Reply
Old Aug 21, 2008 | 12:41 AM
  #2  
katkaroto's Avatar
dewey
Tenured Member 10 Years
 
Joined: Sep 2007
Posts: 580
Likes: 1
From: Minnesota
if your looking for an assembly, go towards the parts car area... may take a while but go to themazdaforum.com go to spooledupracing, and request the part. or go to your nearest junk yard.
Reply
Old Aug 21, 2008 | 12:58 AM
  #3  
SouthSideSlider's Avatar
whats a Turbo V?
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 1,215
Likes: 0
From: Goose Creek, SC
easyest just to get a whole assembly.
Reply
Old Aug 21, 2008 | 01:36 PM
  #4  
tuto88t2's Avatar
Full Member
 
Joined: Apr 2008
Posts: 156
Likes: 0
From: NJ
how much would the assembly cost? wats it include?
Reply
Old Aug 21, 2008 | 02:11 PM
  #5  
Syncro's Avatar
Buildup Thread Encourager
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 1,170
Likes: 0
From: Miami, FL
Expect to pay ~$50 for a working assembly. That may or may not include the actual sunroof panel.

Assembly should include the motor, rails and the metal frame itself.

Make sure to clean\grease it properly before you put it into the car.

Oh and, the sunroof won't open\close right unless it's got the interior trim on the panel.
Reply
Old Aug 21, 2008 | 11:45 PM
  #6  
connors14's Avatar
Thread Starter
ROTOR > PISTON
iTrader: (2)
 
Joined: Jun 2008
Posts: 143
Likes: 0
From: milford, connecticut
okay thank you
Reply
Old Aug 30, 2008 | 08:07 PM
  #7  
MmSadda's Avatar
Rotary Freak
iTrader: (2)
 
Joined: Jul 2006
Posts: 1,595
Likes: 2
From: Columbus, OH
Originally Posted by Syncro
Expect to pay ~$50 for a working assembly. That may or may not include the actual sunroof panel.

Assembly should include the motor, rails and the metal frame itself.

Make sure to clean\grease it properly before you put it into the car.

Oh and, the sunroof won't open\close right unless it's got the interior trim on the panel.
Can someone elaborate on this? Does that just mean the carpeted piece on the sunroof panel itself?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM




All times are GMT -5. The time now is 03:43 AM.