Subzero assist valve Nipple ID needed!
07-22-04, 05:03 PM
#1
Epitrochoid Chamber FTW
Thread Starter
Subzero assist valve Nipple ID needed! HELP!
What do the two nipples on the SUB assist valve do/go to on the LIM of a 88 T2?
Also the nipple just below it connects to what?
Thanx!
Also the nipple just below it connects to what?
Thanx!
Last edited by Rotaryrockstar; 07-22-04 at 05:26 PM.
07-22-04, 05:19 PM
#2
Epitrochoid Chamber FTW
Thread Starter
Does the nipple below the Subassist go to the FPR solenoid?
This is after VacRack removal and yes I do want to keep the FPR.
This is after VacRack removal and yes I do want to keep the FPR.
Last edited by Rotaryrockstar; 07-22-04 at 05:25 PM.
07-22-04, 05:41 PM
#3
Lives on the Forum
On an n/a they go to the inlet runners, which would be the best place to inject something in the intake, wouldn't ya think? 
Nipple just below- are you refering to the boost/ pressure sensor line? Or something up above that? Turbos are probably different, I'm sure, with the vac routing...
Nipple just below- are you refering to the boost/ pressure sensor line? Or something up above that? Turbos are probably different, I'm sure, with the vac routing...
07-22-04, 05:45 PM
#4
Epitrochoid Chamber FTW
Thread Starter
What are inlet runners? I think one went to the start assist fluid resevoir... the other... I am not sure... I have completely removed all that crap... Not sure what to do with these holes?
Black RTV+ vac cap and hose clamp?
BTW do you mean NOS!!????
Bleh!!!
Black RTV+ vac cap and hose clamp?
BTW do you mean NOS!!????
Bleh!!!
07-22-04, 05:48 PM
#5
Lives on the Forum
Ahh, you're talking about the lines, I thought you were refering to the holes in the manifold, my bad...
I just plugged mine with black RTV years ago, and it's held up all this time...
I just plugged mine with black RTV years ago, and it's held up all this time...
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM