what do i mix up to put in there?

 

LOL... it's surposed to be 90% anti freeze and 10% water. it doesn't even get used unless it's under 0F. they actually recalled the system since they had problems with it. most people remove it. your's may even be disconnected.

 

what all do i need to take out to get rid of this system>?

 

Simply remove the cold start bottle (slips off the bracket with some effort) and plug the nipple on the intake with a vacuum cap. If you want to get fancy, you can remove the whole little valve assembly from the intake and make a blockoff plate (like I did).

 

Or remove the whole assembly, Including Valve, Now remove the 2 thread rods and JB Weld the 2 little holes going through the Intake Manifold. Be sure to fill In the holes flush with the Intake ensuring a neat appearance.