Stumped...please help! **.**
03-06-08, 02:19 AM
#1
Full Member
Thread Starter
iTrader: (3)
Join Date: May 2007
Location: HI
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Stumped...please help! **.**
****Prepare flame suit****
I just finished my S5T2 motor into a S4NA chassis, I used the S5T2 engine harness and used the S4NA chassis harness. My problem now is how in the heck do I hook up the alternator wires as both plugs and traced connections are not present........the loop black wire was easy, but I can't seem to figure out the other...almost done...thanks =)
I just finished my S5T2 motor into a S4NA chassis, I used the S5T2 engine harness and used the S4NA chassis harness. My problem now is how in the heck do I hook up the alternator wires as both plugs and traced connections are not present........the loop black wire was easy, but I can't seem to figure out the other...almost done...thanks =)
03-06-08, 02:41 AM
#2
https://www.rx7club.com/showthread.p...ernator+wiring
this thread has some wiring diagrams you can use to rewire it. It ends up being pretty straightforward.
this thread has some wiring diagrams you can use to rewire it. It ends up being pretty straightforward.
Thread
Thread Starter
Forum
Replies
Last Post
