Stock boost on tII
#1
terminally boosted
Thread Starter
Join Date: Jul 2001
Location: dupont, Indiana
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
Stock boost on tII
Can anyone tell me what the stock boost pressure is for a 88 turbo two rx-7? Also if i get a apexi n1 dual exhaust will I need an fcd. Also would a downpipe help the turbo spool up faster?
#2
knowledge junkie
I think this is right:
87-88 - 5.5PSI
89-92 - 6.5PSI
Yep - the downpipe, exhaust, cat, & intake will help the turbo spool up faster - and cause it to run slight above OEM. Just be sure to get the air/fuel and boost guages on before doing the mods so you'll know if your running too lean/out of spec.
87-88 - 5.5PSI
89-92 - 6.5PSI
Yep - the downpipe, exhaust, cat, & intake will help the turbo spool up faster - and cause it to run slight above OEM. Just be sure to get the air/fuel and boost guages on before doing the mods so you'll know if your running too lean/out of spec.
#5
In gauges you get what you pay for. If you pay big $$$ you will have an awsome gauge. I went with Autometer in my car for the same reason, they were cheap. And they are cheap, the movement isnt as crisp, I am sitll wondering how accurate my boost gauge is (going to verify it soon) and while the autometer A/F gauge is flashy with all it's lights I am not sure how accurate it is, my guess is that it would operate better with a new O2 sensor. I am thinking of adding an exhuast gas temp gauge, if I do so I wll splurge on a good one.
Thread
Thread Starter
Forum
Replies
Last Post