2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

stock alarm Qs

Thread Tools
 
Search this Thread
 
Old Oct 14, 2006 | 11:46 PM
  #1  
jeff_man's Avatar
Thread Starter
N00b
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 485
Likes: 0
From: Dallas TX
stock alarm Qs

so i replaced a all my fuses to day and for the first time ever my car alarm started going off, i didn't even know i had one and i couldn't get it to turn off so i pulled the horn plugs off the hurn speakers and let the car go it's thing tell it turned off then said wtf.

so how do you turn off a stock gen 2 rx7 alarm? the car wouldn't start so thats not it, and the passager side lock wouldn't do it, my driver side handle and lock dont work so i bet that how i do it

is there a way to turn it off with out having to unlock the driver side door if thats how it works
Reply
Old Oct 15, 2006 | 12:18 AM
  #2  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Turn the Key in the Door (any door) to unlock to disarm the factory alarm
Reply
Old Oct 15, 2006 | 12:27 AM
  #3  
jeff_man's Avatar
Thread Starter
N00b
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 485
Likes: 0
From: Dallas TX
i unlocked the passager door as it was going off and it didn't stop =/

i'll take past the shop i guess
Reply
Old Oct 15, 2006 | 12:36 AM
  #4  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
try the trunk then...

Sure that it is the factory alarm going off?
Reply
Old Oct 15, 2006 | 12:45 AM
  #5  
jeff_man's Avatar
Thread Starter
N00b
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 485
Likes: 0
From: Dallas TX
ya i replaced the room fuse and the security ligth came on for the first time ever.
Reply
Old Oct 15, 2006 | 05:23 PM
  #6  
rotary_yankee's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Sep 2005
Posts: 134
Likes: 0
From: Orlando
yo wuzup jeff it tony. how my baby or your baby.
Reply
Old Oct 15, 2006 | 05:24 PM
  #7  
rotary_yankee's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Sep 2005
Posts: 134
Likes: 0
From: Orlando
hey wuzup it tony hit me up
Reply
Old Oct 15, 2006 | 08:18 PM
  #8  
jeff_man's Avatar
Thread Starter
N00b
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 485
Likes: 0
From: Dallas TX
you build the motor wrong, you have no clue how to run vac lines, the gas tank was 100% rusted and the fuel pump was so loud because it was pumping pure rust. all the elctical is wrong and the wiring harnis was not from a t2. and thats just the stuff i fixed the first weekend i had it.
Reply
Old Oct 15, 2006 | 10:31 PM
  #9  
VacavilleFC's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: May 2006
Posts: 1,081
Likes: 0
From: Vacaville Ca
i just fixed my alarm, theres 2 wires that run to the outer door handle, on my car someone had replacesd the door hand and cut the wire and just left it hanging there, maybe the same has happend to you
Reply
Old Oct 15, 2006 | 11:23 PM
  #10  
jeff_man's Avatar
Thread Starter
N00b
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 485
Likes: 0
From: Dallas TX
no the handle dosen't work and the key hole dosen't lock/unlock, i'm going to have to get a new one / fix it, once the rain stops i'll **** with it
Reply
Old Oct 16, 2006 | 12:09 AM
  #11  
TOOSHORT_88's Avatar
"On the grind"
Tenured Member: 20 Years
Liked
iTrader: (15)
 
Joined: Jan 2005
Posts: 1,374
Likes: 42
From: everywhere
all you gotta do is get the plastic piece that sits inside your door handle on the lock... Disables your stock alarm when you turn the key hole. My driver side is missing so if i unlock my car it goes off have to unlock the passenger side then go to driver side and its fine... hope that helps
Reply
Old Oct 16, 2006 | 07:12 PM
  #12  
rotary_yankee's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Sep 2005
Posts: 134
Likes: 0
From: Orlando
i heard they took alot of **** from your car
Reply
Old Oct 16, 2006 | 11:40 PM
  #13  
TOOSHORT_88's Avatar
"On the grind"
Tenured Member: 20 Years
Liked
iTrader: (15)
 
Joined: Jan 2005
Posts: 1,374
Likes: 42
From: everywhere
who me ?
Reply
Old Oct 17, 2006 | 12:40 AM
  #14  
tandolla's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (1)
 
Joined: Dec 2005
Posts: 1,017
Likes: 0
From: Everett, WA
toshort.. did you ever find your other car.?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cristoDathird
Introduce yourself
28
May 30, 2019 08:47 PM
msilvia
3rd Generation Specific (1993-2002)
28
Apr 14, 2016 12:58 PM
pzr2
General Rotary Tech Support
1
Aug 15, 2015 08:29 PM




All times are GMT -5. The time now is 05:23 AM.