jono20

my stereo and clock wont turn on anymore after troubleshooting the ECU.

Ive checked and replaced every fuse I could think of, along with the one on the back of the deck.

what else could it be?

scheistermeister

for the clock probably the cold solder joints in it

jono20

it worked before though, I mean they both cut off at the same time.

basically everythign that turns on when you put the key to "accesory"

NZConvertible

With the key in the ACC position, check to see you've got 12V at the ACC wire on the ignition barrel harness. It's the light blue wire.

RETed

Throw that piece of **** stock stereo in the trash.
Get an aftermarket unit - you'll be a lot happier with the sound.

The warning cluster is prone to cold solder joint failure.
Redoing the solder joints is something that NEEDS to be done, regardless if it's the culprit or not.


-Ted

jono20

It is aftermarket Ted. Sony 7710 Mp3 Cd

ill check the voltage now...

Icemark

do you have access to a digital multi-meter that you can check the voltage at the back of the plugs with???

jono20

yes. I was busy today so I never got a chance to check it.

Ice, I re,meber you telling me I might ahve some ignition problems regarding my logicon and wipers not turning on. Maybe it is failing even further now (though the wipers and logicon seem to be working again!!?)

jono20

Im getting 12v at the blue wire. what now?