ok when I start my rebuild is there a certain time and rpm I should leave it running for. like when I did my 350 I had to let it Idle at 1750rpm for 30 min before driving it. Do I have to do something simmilar on the rotary

 

nah just keep it at low-mid rpm's until you've reached 1000+ km's then you can do whatever you want to it.

 

you may have to set the idle up with the screw (if you have an N/A. Just drive it really easily and always warm it up before driving. It's up to you how long you go before redlining. I'd recommend 1500-2000 miles.