starting problems
#1
Full Member
Thread Starter
Join Date: Aug 2002
Location: fl
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
starting problems
i have an 87 na se 5 speed and just last week when i would go to start it the starter would click and i would do this about 10 times and then finally it would start, well about 2 days ago it wouldnt start at all but it still clicks/ is it my starter or something else/ i was reading the manual and it stated something about the engine seizing how will i know this has happened/ please help /
thanks red
thanks red
#2
I have the exact same problem. But mine would start on the third attempt but now it doesn't start at all without a pushstart. I already changed starters out and don't think that is the problem.
Bump
Bump
#3
Full Member
Join Date: Aug 2001
Location: Wellington, New Zealand
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
the clicking sounds like it ur starter motor i cant see it beening your engine if you use it daily and always cheack your oil it shouldnt be that! I would pull of u stater motor and strip it down, its not that hard to do a coulpe of srews and and couple of 10 mm bolts and cheack and see how long the carbon brushes are it will on the top of the starter motor if one brush is to short and not touching the com (the copper color thing) that would be your promble. if the are still long i would start looking at the soilnoid! if u have any prombles with it just pm me and i will help u thought it coz at work we fix starter motors everyday! and if you have the hayes manual it tells u how to do it in there too!
#4
Driving RX7's since 1979
iTrader: (43)
Join Date: Aug 2001
Location: So Cal where the OC/LA/SB counties meet
Posts: 6,096
Likes: 0
Received 8 Likes
on
8 Posts
Most common cause
Dirty battery post connections. Solution... Clean with battery post cleaning too from any auto parts store.
Second most common
Bad starter Sylinoid. Solution.... replace
Rare but it happens problem (and I'm dealing with this now)
Cable from battery to Starter is damaged. Your starter is trying to draw the amps it needs, but the damage is creating too much resistance.
Solution.... Either run a heavy guage "jumper wire" from the positive battery terminal to the starter or go to a wrecking yard and cut out a stock one from the main harness.
Good luck with this one. It can be frustrating.
Second most common
Bad starter Sylinoid. Solution.... replace
Rare but it happens problem (and I'm dealing with this now)
Cable from battery to Starter is damaged. Your starter is trying to draw the amps it needs, but the damage is creating too much resistance.
Solution.... Either run a heavy guage "jumper wire" from the positive battery terminal to the starter or go to a wrecking yard and cut out a stock one from the main harness.
Good luck with this one. It can be frustrating.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM