starting problem--Please help!!!
Thread Starter
Newbie
Joined: Jun 2007
Posts: 0
Likes: 0
From: Chicago
starting problem--Please help!!!
I have an 88'vert....W/New plugs..new bat.....
Last month I left the ingnition turned on that led to a dead Bat...Next I tried to jump start w/ a charger-starter.. It just clicked @ the selinoid, then just one clicking noise.. no luck prevail... I then replaced the plugs and Bat.
Now it just turns W/ no start..Gas is reaching the plugs..I do not know if it is sparking..What should I check?... It started just fine before I foolishly left the ignotion on the on position...
Please advise.
Last month I left the ingnition turned on that led to a dead Bat...Next I tried to jump start w/ a charger-starter.. It just clicked @ the selinoid, then just one clicking noise.. no luck prevail... I then replaced the plugs and Bat.
Now it just turns W/ no start..Gas is reaching the plugs..I do not know if it is sparking..What should I check?... It started just fine before I foolishly left the ignotion on the on position...
Please advise.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Adaptronic Cranking fuel table messed up?
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM