2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

starting problem

Thread Tools
 
Search this Thread
 
Old Sep 10, 2004 | 11:17 AM
  #1  
vibspecv's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 19
Likes: 0
From: Ontario, Canada
starting problem

Hey guys my bro and I are trying to figure this out and i haven't had much luck searching on here for it. Anyways the problem is when trying to start the car. The starter will turn the motor, but everyonce and awhile it will crank and sound like a dead spot and skip over, but by that time it's flooded the motor.

Now i'm not sure if this is a starter problem, i've also been told it may be a coil problem.

2nd problem comes at about 6000rpm, it's almost like a shudder or a miss, it's not boostcut, now could this also be related to a posible coil problem??

Car in question is a 88 10ae

Last edited by vibspecv; Sep 10, 2004 at 11:20 AM.
Reply
Old Sep 10, 2004 | 11:57 AM
  #2  
Parastie's Avatar
Mountain Rotary Mod
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 2,411
Likes: 0
From: Freaking Poland!!
It might be related to your coil problem.

Check to see if the engine is getting spark. How long has it been since you've changed the sparkplugs/spark wires? Also, do a compression check just to be safe.
Reply
Old Sep 10, 2004 | 12:15 PM
  #3  
WAYNE88N/A's Avatar
Lives on the Forum
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 5,721
Likes: 3
From: Coldspring TX
I second the compression check.

How old are the plug wires? Plugs?

Check the coils per the FSM...

Check your grounds also...

I don't understand this "dead spot and skip over..."...Is it akin to a couple of teeth missing on the flywheel, or just the weird flooding sounds?
Reply
Old Sep 10, 2004 | 03:19 PM
  #4  
vibspecv's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 19
Likes: 0
From: Ontario, Canada
Originally Posted by WAYNE88N/A
I second the compression check.
--> well the motor has about 15000kms since it's rebuild 3 years ago

Originally Posted by WAYNE88N/A
How old are the plug wires? Plugs?
--> plugs and wires were replaced maybe 7000kms ago.

Originally Posted by WAYNE88N/A
Check the coils per the FSM...
--> ya i've gotta look that up in the fsm

Originally Posted by WAYNE88N/A
Check your grounds also...
--> and i've been meaning to check the grounds

Originally Posted by WAYNE88N/A
I don't understand this "dead spot and skip over..."...Is it akin to a couple of teeth missing on the flywheel, or just the weird flooding sounds?
--> when cranking the car, you hear the car trying to turn over and then all of a sudden it sounds like it bogs and then keeps trying to turn the car over, but usually by this time it flooded itself, it's hard to explain.

Last edited by vibspecv; Sep 10, 2004 at 03:30 PM.
Reply
Old Sep 10, 2004 | 05:01 PM
  #5  
vibspecv's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 19
Likes: 0
From: Ontario, Canada
anyone ?
Reply
Old Sep 11, 2004 | 02:42 AM
  #6  
vibspecv's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 19
Likes: 0
From: Ontario, Canada
alright no one :P
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
1993fd3sracer1
3rd Generation Specific (1993-2002)
29
Oct 13, 2015 01:57 PM
1993fd3sracer1
1st Generation Specific (1979-1985)
20
Sep 7, 2015 11:50 AM




All times are GMT -5. The time now is 05:26 AM.