Im almost complete with my 5 speed swap, i just have to do the wiring, where do you connect the ignition wire too, i hooked it up about 4in from the ignition switch, then ran it down through the fire wall and connected it to the starter. the car did not start, the gauages did not move, so i hooked all the wiring as it was before i startred and the gauages worked, so where have you guys who have done this swap hooked up the ignition wire?
also can you explain how to wire the reverse lights?

Thanks
Dan

 

please help i think ive tried almost everything

 

I believe that their is a switch on the drivers side of the transmission that activates the reverse lights.

If memory serves the wires are green.