Starter Bolts
11-20-07, 06:36 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2006
Location: East Wenatchee, Washington
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Starter Bolts
Yeah so my starter is missing a bolt, I was wondering if anyone here knows the size of the starter bolts. I know theres two bolts and i only have one, its the long one. If im right the other bolt should be a shorter one? I tryed to google it but found nothing
any help would be appreciated, Thanks
any help would be appreciated, Thanks
11-20-07, 06:47 PM
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Not only shorter, but coarser threads than the other bolts that hold the transmission to the engine. Be careful and get the right short bolt. No. I've no idea of the pitch etc of that bolt.
11-20-07, 06:51 PM
#3
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
I just did a SEARCH and came up with this thread: https://www.rx7club.com/forum/showth...t=starter+bolt
Read the post by MYBABY. It gives the coarse starter bolt info.
I started the search at 6:47 and wrote this at 6:51.
Ah, ****. I just read that. It does NOT give the pitch of the threads. Just says *coarse*. Sucks. Not good information. Vague.
Read the post by MYBABY. It gives the coarse starter bolt info.
I started the search at 6:47 and wrote this at 6:51.
Ah, ****. I just read that. It does NOT give the pitch of the threads. Just says *coarse*. Sucks. Not good information. Vague.
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM