2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Stalling

Old Apr 23, 2005 | 11:24 AM
  #1  
Ronald E. Jacques's Avatar
Thread Starter
OK, next project...
Tenured Member 10 Years
 
Joined: Dec 2003
Posts: 289
Likes: 1
From: Greenfield, Indiana
Stalling

I've finally gotten my idle problems worked out. Installed new TPS and after struggling to adjust it the car now idles perfect, revs perfect, starts easily. Thank God.

Only problem remaining, when approaching a stop, if I clutch it while the revs are still high, like when going 50mph or so and the light suddenly goes red, the revs will drop so low that it sometimes stalls. This does not happen in lower gears when the engine is at low revs, only when the tach instantly drops from like 4000 or higher straight down to idle.

I've never had my injectors cleaned or flow checked and for all I know they are full of junk. Could that be it?

BTW I recently installed a light flywheel, but I had the problem before that.

Thanks.
Reply
Old Apr 23, 2005 | 01:42 PM
  #2  
hIGGI's Avatar
Moderator
Tenured Member: 25 Years
iTrader: (7)
 
Joined: Feb 2001
Posts: 4,988
Likes: 18
From: Czech Republic [www.rx7cz.net]
Try to adjust dashpot at TB, it might not be working properly and is there exactly for reasons to not let rpm's drop too fast.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
Mar 20, 2018 01:54 PM
Einheri
Single Turbo RX-7's
14
Oct 7, 2015 12:23 PM
xXBrendanXx
Power FC Forum
6
Sep 17, 2015 10:10 AM
REX7&Z32TT
New Member RX-7 Technical
5
Sep 9, 2015 05:16 AM
Steven_McKinley
General Rotary Tech Support
12
Sep 5, 2015 10:48 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:53 PM.