Spark per revolution question, should be easy
#1
Learned alot | Alot to go
Thread Starter
iTrader: (2)
Join Date: Apr 2002
Location: Rotaryland, New Hampshire
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
Spark per revolution question, should be easy
I sort of feel like experementing and want to make a sequential shift light and got confused
For an rpm signal, could i use the trailing coil, and if so would that give me 2 spark signals per rpm?
For an rpm signal, could i use the trailing coil, and if so would that give me 2 spark signals per rpm?
#4
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Both of the coils have a short lead with a feamale bullet plug that can be used for connect a tach or shift light. Both coils will give you two pulses per revolution (each rotor is fired once per rev).
Don't let the waste spark set-up fool you. The trailing coil wire gives a summed signal (one coil then the other), so both coils will give you the same reading.
Don't let the waste spark set-up fool you. The trailing coil wire gives a summed signal (one coil then the other), so both coils will give you the same reading.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM