Sound deadening
#1
No rotary, no problems?
Thread Starter
Join Date: Nov 2004
Location: Dubuque, IA
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Sound deadening
Since I'm putting in a new stereo, I'd like to add some sound deadening material into various areas of my car. I know the usual areas like the door panels and trunk and such, but are there any other key areas to place the stuff on the FC besides the door panels? Also, could you guys recommend a good company to purchase a few rolls of the stuff from? Thanks!
#2
Senior Member
Join Date: Jul 2004
Location: Waco Texas
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
On my vert i have an alpine 8 in the trunk and it rattled everything that you could imagine because ive got it up full blast to get sound into the cabin. Anyways i ordered stuff off ebay and lined the insides of my trunk with it and it worked extremely well and i thought it was affordable. I just got the stuff last week, he shipped it fast and 10 feet was more than enough to cover the trunk lid and bottom and rear side portion of my trunk. heres the link of the stuff i got:
http://cgi.ebay.com/ws/eBayISAPI.dll...MEWN%3AIT&rd=1
http://cgi.ebay.com/ws/eBayISAPI.dll...MEWN%3AIT&rd=1
#3
Rebuilding the 7
dynomat, b-quiet, rhynoliner, rubberized undercoating from walmart or other, or for some places you can use expanding foam. c_mart_28 has had plenty of practice with this. email or pm him.
Curtis
I'll be back to Iowa on the 16th of Aug if you need any help. I'm from Creston but I will be spending a good ammount of time in Des Moines.
Curtis
I'll be back to Iowa on the 16th of Aug if you need any help. I'm from Creston but I will be spending a good ammount of time in Des Moines.
#4
Junior Member
Join Date: Jan 2005
Location: Canada! eh!
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
I am currentlly runing 2 12" fosgates in my FC and I have no sound dampaning but nothing shakes. I did however lower the hinges for my hatch about 1/8" and put weather stripping around the hatch itself
#5
No rotary, no problems?
Thread Starter
Join Date: Nov 2004
Location: Dubuque, IA
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the help guys. I've been looking around at materials and am not really sure what to go with yet or where exactly to place the material...
Thread
Thread Starter
Forum
Replies
Last Post