2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Sound deadening

Thread Tools
 
Search this Thread
 
Old Jul 30, 2005 | 01:12 PM
  #1  
Ice_Wolf's Avatar
Thread Starter
No rotary, no problems?
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 1,567
Likes: 0
From: Dubuque, IA
Sound deadening

Since I'm putting in a new stereo, I'd like to add some sound deadening material into various areas of my car. I know the usual areas like the door panels and trunk and such, but are there any other key areas to place the stuff on the FC besides the door panels? Also, could you guys recommend a good company to purchase a few rolls of the stuff from? Thanks!
Reply
Old Jul 30, 2005 | 01:57 PM
  #2  
Therotaryrocket85's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Jul 2004
Posts: 254
Likes: 0
From: Waco Texas
On my vert i have an alpine 8 in the trunk and it rattled everything that you could imagine because ive got it up full blast to get sound into the cabin. Anyways i ordered stuff off ebay and lined the insides of my trunk with it and it worked extremely well and i thought it was affordable. I just got the stuff last week, he shipped it fast and 10 feet was more than enough to cover the trunk lid and bottom and rear side portion of my trunk. heres the link of the stuff i got:

http://cgi.ebay.com/ws/eBayISAPI.dll...MEWN%3AIT&rd=1
Reply
Old Jul 30, 2005 | 03:53 PM
  #3  
rotarymarine's Avatar
Rebuilding the 7
Tenured Member 15 Years
 
Joined: Dec 2002
Posts: 392
Likes: 1
From: Omaha, NE
dynomat, b-quiet, rhynoliner, rubberized undercoating from walmart or other, or for some places you can use expanding foam. c_mart_28 has had plenty of practice with this. email or pm him.

Curtis

I'll be back to Iowa on the 16th of Aug if you need any help. I'm from Creston but I will be spending a good ammount of time in Des Moines.
Reply
Old Jul 30, 2005 | 03:57 PM
  #4  
civic slasher's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Jan 2005
Posts: 37
Likes: 0
From: Canada! eh!
I am currentlly runing 2 12" fosgates in my FC and I have no sound dampaning but nothing shakes. I did however lower the hinges for my hatch about 1/8" and put weather stripping around the hatch itself
Reply
Old Jul 31, 2005 | 10:48 AM
  #5  
Ice_Wolf's Avatar
Thread Starter
No rotary, no problems?
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 1,567
Likes: 0
From: Dubuque, IA
Thanks for the help guys. I've been looking around at materials and am not really sure what to go with yet or where exactly to place the material...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rbkouki
V-8 Powered RX-7's
0
Sep 29, 2015 08:54 PM
baix2
Power FC Forum
1
Sep 28, 2015 09:40 AM




All times are GMT -5. The time now is 02:49 PM.