2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Some random questions

Thread Tools
 
Search this Thread
 
Old 10-16-05, 06:50 PM
  #1  
Newbie
Thread Starter
 
2cool4pistons's Avatar
 
Join Date: May 2005
Location: Arizona
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Some random questions

I just have some random questions. First how do i make my motorized headlights open only half way. I saw it on Formula D and thought it looked sick. Is there a conversion kit i can buy or just something i can do to the light motors.

Secondly how do i compression test a rotary?

Lastly, does anybody know where i can get a replacement stock crossover for the speakers. Mine has a broken plug and i want to replace it. Any feedback will be greatly appreciated. Thanks alot.
Old 10-16-05, 07:23 PM
  #2  
Play Well

 
fcdrifter13's Avatar
 
Join Date: Feb 2005
Location: We're all fine here now, thank you. How are you?
Posts: 4,218
Likes: 0
Received 0 Likes on 0 Posts
I could say search for the lights but I am in a good mood. Pull the light motor switch under the hood and then adjust to your pleasing.

Also you can download the factory Sevrice Manual. It should have the way to do the compression test in it.
Old 10-16-05, 07:29 PM
  #3  
Green Flameless

iTrader: (2)
 
WonkoTheSane's Avatar
 
Join Date: Feb 2002
Location: North Central PA
Posts: 2,242
Likes: 0
Received 0 Likes on 0 Posts
Hello, 2cool4pistons - Welcome to the forum. I'll go easy on you since you're a n00b

I just have some random questions. First how do i make my motorized headlights open only half way. I saw it on Formula D and thought it looked sick. Is there a conversion kit i can buy or just something i can do to the light motors.
Be careful with this one, you're likely about to get flamed, so get a nomex suit or thick skin Do a search for "Sleepy Eye Mod" or something related, and you'll find tons of threads, most of them locked because they devolve into a flame fest. Most of the people here hate this "mod" because it severely reduces the already limited 1986 lighting ability. that's all I'll say on this subject.

Secondly how do i compression test a rotary?
Do a search for "compression test" here and in the 2nd gen archive. You'll get a detailed writeup. The nuts-and-bolts: Make sure the car is warm and the battery is good and fully charged. Take your thirty dollar compresion tester, and unscrew the valve in the bottom that holds the needle at a certain pressure. screw this TIGHTLY into the lower spark plug hole, and then hold the pedal all the way down ont he floor while your crank. Have a friend watch the guage for the three pulses, and record what number they were. If it's less than 80, you've got problems, if it's greater than 100, you're looking at a good engine. Somewhere in between means you're headed for rebuilds-ville.

Lastly, does anybody know where i can get a replacement stock crossover for the speakers. Mine has a broken plug and i want to replace it. Any feedback will be greatly appreciated. Thanks alot.
If you're talking about the little board in the rear speaker cabinate, that's actually an amplifier. you're better off not even using it with a modern deck, as the newer electronics technology is vastly superior to your 1980s stereo equipment. If you're using it with the stock deck, then I'd suggest heading over to the "For Sale" section on the front page of this forum, you can defiantely find one there for cheap.

Cheers!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
05-25-21 05:37 AM
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM



Quick Reply: Some random questions



All times are GMT -5. The time now is 10:17 PM.