some new problems
#1
Rotary Enthusiast
Thread Starter
Join Date: Aug 2005
Location: OH
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
some new problems
just recently occured.
car is 90 gxl with everything all stock.
1) sometimes when i turn the wheels from one locking position to the other, the cars starts to shake. i have power steering fuild.
2) a while ago i took both antanna fuses (ANT IG AND ANT) out so that i wouldnt have to hear the anntena motor because it and the radio wasnt working. im thinking it doesnt have enough power for the EQ becasue the deck turns on but the EQ just looks dim. it works sometimes, like once a week. when the fuses where out my alrm was woring perfect.
i just now put the fuses back so that i can get my power dorr locks and for some reason now my antenna works (goes up and down), but no alarm. WTF is going on? HELP PLEASE, i want my alarm back
thanks in advance
car is 90 gxl with everything all stock.
1) sometimes when i turn the wheels from one locking position to the other, the cars starts to shake. i have power steering fuild.
2) a while ago i took both antanna fuses (ANT IG AND ANT) out so that i wouldnt have to hear the anntena motor because it and the radio wasnt working. im thinking it doesnt have enough power for the EQ becasue the deck turns on but the EQ just looks dim. it works sometimes, like once a week. when the fuses where out my alrm was woring perfect.
i just now put the fuses back so that i can get my power dorr locks and for some reason now my antenna works (goes up and down), but no alarm. WTF is going on? HELP PLEASE, i want my alarm back
thanks in advance
Last edited by darksider; 04-10-06 at 04:37 AM.
#3
Rotary Enthusiast
Thread Starter
Join Date: Aug 2005
Location: OH
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
anything? i know i aint a girl but i still need help as a noob... i check sensors, they come on so it cant be that. how do i know? i checked the light for the trunk and hood and door lights go on and off when doors open and close. the alarm itself isnt working at all, like it need be turned on again. i have 10a fuse in the rooms 7.5 fuse. that shouldnt be a problem should it? PLEASE AND THANK
Last edited by darksider; 04-10-06 at 11:50 AM.
#4
why not move the carpet on the interior where the antena is and unplug the motor leaving the accual antena wire pluged in and replace both fuses and see where that leads
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM