solenoid rack vac lines
02-03-08, 02:21 AM
#1
Full Member
Thread Starter
Join Date: Jul 2005
Location: adelaide
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
solenoid rack vac lines
Like alot of FC's, mine has had its solenoid rack removed for FMIC piping.
From the looks of it, not much thought was put into this & all the vac lines around these solenoids have just been capped.
Now since this was done to the car, its had a lumpy idle. Revs will quickly flucuate from around 600rpm-800-900rpm.
I find it very annoying as its a stock port engine & i want it to idle like one.
At the same time as these solenoids were removed a sard FPR was added as well.
Ive since taken the car to a different tuner to see if he could tune it out, but he wasnt able to.
So... do any of these solenoids work in a way so that it oine was removed, it would cause a lumpy idle?
From the looks of it, not much thought was put into this & all the vac lines around these solenoids have just been capped.
Now since this was done to the car, its had a lumpy idle. Revs will quickly flucuate from around 600rpm-800-900rpm.
I find it very annoying as its a stock port engine & i want it to idle like one.
At the same time as these solenoids were removed a sard FPR was added as well.
Ive since taken the car to a different tuner to see if he could tune it out, but he wasnt able to.
So... do any of these solenoids work in a way so that it oine was removed, it would cause a lumpy idle?
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM
