smoked interior harness.. need help.
smoked interior harness.. need help.
OK, so my interior harness became fried due to a faulty headlight switch. the fuse never popped and it just kept smoldering. I plan on tearing the whole interior of this car out over the winter for a cage install.
However, i want to drive this car right now, but seeing as i dont have any lights i cannot. I would like to be able to just make a completely seperate harness from the stock one. I want a very simple one that just i can just splice into the origional harness at the pigtails.
What all do i need? im ok with wiring for the most part, but i feel like this car has a problem with me.
I dont need the lights to flip up as i am getting BN aero.
Can i use a harness that is meant for fog lights and just run a switch to the running lights and headlights?
Thanks a lot guys, i appreciate it.
Billy
However, i want to drive this car right now, but seeing as i dont have any lights i cannot. I would like to be able to just make a completely seperate harness from the stock one. I want a very simple one that just i can just splice into the origional harness at the pigtails.
What all do i need? im ok with wiring for the most part, but i feel like this car has a problem with me.
I dont need the lights to flip up as i am getting BN aero.
Can i use a harness that is meant for fog lights and just run a switch to the running lights and headlights?
Thanks a lot guys, i appreciate it.
Billy
How much of the harness? Is it just the part where it connects to the headlight switch?
If so, that's a smaller harness that gets replaced whenever you replace the headlight switch. [Has a blue connector above your left foot area, remove the speaker in the dashboard to make access easy]
If so, that's a smaller harness that gets replaced whenever you replace the headlight switch. [Has a blue connector above your left foot area, remove the speaker in the dashboard to make access easy]
the Green/White wire, as well as the Red/Black wire are fried. All the way through the harness. Even passed the blue connector. the Green/White wire goes to the fuse box, and the Red/Black wire goes through the firewall. they are both melted. The fuse even melted but never popped. I think it was a harbor freight or something..
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
I think you mean 87 right?
by the way,OP: the s4 and s5 interior harnesses are different..so get the right one,,and it is a Beotch of a job to do..involves taking the whole dash out,..among other things.
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Trending Topics
Can I use a universal fog light harness and just splice into the lights for now? I just need something for the rest of the summer. Car gets stripped and caged this winter.
would these work to just rewire the car? please help me out on this guys!! thanks
http://cgi.ebay.com/ebaymotors/UNIVE...item2a083df058
http://cgi.ebay.com/ebaymotors/UNIVE...item2a083df058
Thread
Thread Starter
Forum
Replies
Last Post
acha3
2nd Generation Specific (1986-1992)
7
Sep 6, 2015 08:14 AM
ZaqAtaq
New Member RX-7 Technical
2
Sep 5, 2015 08:57 PM




