2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

smoke from exhaust. turbo? engine? premix?

Thread Tools
 
Search this Thread
 
Old Sep 4, 2007 | 08:29 PM
  #1  
initial D is REAL!'s Avatar
Thread Starter
Rotary Enthusiast
 
Joined: Mar 2007
Posts: 1,485
Likes: 0
From: Pasadena
smoke from exhaust. turbo? engine? premix?

Ive been puzzled lately about some smoke coming from my exhaust. It looked white so at first I was thinking it was coolant from the engine, but I havent been loosing coolant. So im having trouble trying to pinpiont where it is coming from. ANyone got a good way to tell if its from engine, turbo , or premix?

1)I run a little more premix than normal to be safe. I go by the measurements off the bottle, so its not that accurate. But I usually put 8-12oz of premix with 8gallons of fuel. Would that make my exhaust smoke?

2)I just got my turbo rebuilt by a shop, but I have heard stories of people getting smoking turbos from him. I put a 1/8" oil restrictor in the turbo, but I will install my 1/16" one soon

3)My engine? I hope not. Im not a Rotary guru, but Ive been read a few stories.

The smoke coming out is not very ecessive, but I can see it coming out at idle when I look at my exhaust tips. Rarely I can see it from my side or rear view mirror at a stop light. It happens sometimes. Any help is great. Im trying to find a way to narrow down my problem. Im pretty sure its not my coolant, my level stays the same. I cant smell it though because I have 100% water right now, but I will be switching soon. Sorry so long of a post.
Reply
Old Sep 4, 2007 | 09:24 PM
  #2  
RotaMan99's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Dec 2006
Posts: 1,791
Likes: 0
From: New Hampshire
Up here in the North East it has been around high 30s to low 40s. Just about cold enough to cause the steam from the moisture in the exhaust. Is it only on startup for a minute or so and how cold has it been getting where you are?
Reply
Old Sep 4, 2007 | 09:38 PM
  #3  
initial D is REAL!'s Avatar
Thread Starter
Rotary Enthusiast
 
Joined: Mar 2007
Posts: 1,485
Likes: 0
From: Pasadena
right now its been as hot as can be here in southern CA. Realy hot.

It doesnt smoke right on cold startup, but a little after, when I can see my water temp raise, but not at full operating temperature. After its at full tempurature it still smokes, but very little
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM
pzr2
General Rotary Tech Support
1
Aug 15, 2015 08:29 PM
WyomingTII
2nd Generation Specific (1986-1992)
5
Aug 13, 2015 10:42 AM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM




All times are GMT -5. The time now is 10:12 AM.