2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Smoke around turbo?? HELP!

Thread Tools
 
Search this Thread
 
Old Jul 17, 2006 | 08:15 AM
  #1  
88rx7gxl's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Aug 2005
Posts: 555
Likes: 0
From: Midwest
Smoke around turbo?? HELP!

I just put my Jspec S5 engine in my 90 TII. After driving it around a little and shutting it off, there is smoke coming from around the turbo. It burns your eyes like antifreeze, and kind of smells sweet. But its not leaking anything on the ground, or smoking out of the exhaust. Any ideas?
Reply
Old Jul 17, 2006 | 08:54 AM
  #2  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Coolant is leaking at the turbo. You can't see a leak because it boils away as soon as it exits the system.
Reply
Old Aug 20, 2006 | 01:07 AM
  #3  
06fc3s's Avatar
TIME ATTACK FD
Tenured Member 10 Years
iTrader: (8)
 
Joined: Feb 2006
Posts: 624
Likes: 0
From: Silicon Valley, CA
it sounds like the same problem i have. i have a bit of smoke rising from that area two cant see any sign of oil or anything . what do we do to fix it could it be that it is just loose ?..
Reply
Old Aug 20, 2006 | 10:49 AM
  #4  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
It's oil or coolant. Make sure the flanges and banjo bolts are tight. If the problem continues, you will want to replace the oil inlet and outlet flange gaskets, and banjo bolt o-rings. This requires pulling the turbo.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
86glxNA
New Member RX-7 Technical
7
Aug 22, 2015 08:54 PM
pzr2
General Rotary Tech Support
1
Aug 15, 2015 08:29 PM
WyomingTII
2nd Generation Specific (1986-1992)
5
Aug 13, 2015 10:42 AM




All times are GMT -5. The time now is 10:31 AM.