sleeves removal question
#1
Full Member
Thread Starter
Join Date: Jan 2002
Location: Irvine, California
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
sleeves removal question
Okay so I decided to remove my 5th and 6th port sleeves. Seems really easy, but I'm stumped on how to get the front sleeve out of there! I was wondering if there was any 'trick' to get it out or do I just have to yank on it with every tool I have?
#2
Banned. I got OWNED!!!
Join Date: Nov 2001
Location: charlotte
Posts: 625
Likes: 0
Received 0 Likes
on
0 Posts
what do you mean?
do you have the lower intake manifold off and are looking at the sleeves and they are just stuck?
if thats the case they should come out fairly easily, just wiggle them and work them out w/ pliers
do you have the lower intake manifold off and are looking at the sleeves and they are just stuck?
if thats the case they should come out fairly easily, just wiggle them and work them out w/ pliers
#4
Full Member
Thread Starter
Join Date: Jan 2002
Location: Irvine, California
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
niner, yes I have the lower intake manifold off, and I got the rear sleeve out, but the front one wont budge. I might try the ATF thing, that might work.
Monty
90 GXL
Monty
90 GXL
#5
Senior Member
Join Date: Feb 2001
Location: louisville, KY
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
hm.. I'm holding a sleeve right in front of me.. i bet you could lock a pair of pliers onto the bar the control rods hook onto to get a good grip.. But don't be too harsh on it.. the last thing you want is a busted sleeve stuck in there! spray some wd-40 or something up in it and let it sit overnight..
-Tesla
-Tesla
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM