siemens fuel injector
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2005
Location: lebanon ohio
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
siemens fuel injector
I have a pair of siemens deka 3145 750 fuel injectors that I found out shoot a pencil/ lazer stream. I was wondering if these would work on a mildly modded 88t2 as the secondary fuel injectors ?
#3
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
I have them on 87 turbo engines and there was a problem. The PROBLEM is that they would not fit in the rail. I had to *machine* down the top plastic ring just below where the O'ring fits in order for them to go far enough into the rail for the oring to seal.
That said, I also had to double up on stock orings in lieu of the huge oring that came with the fuel injectors. They don't leak and work fine. Just won't fit in a stk series four fuel rail unless you take action. When you take action to get them to fit, will you be able to see 'em at a later date to someone else???>? Matters not to me 'cause I don't sell squat.
http://www.racetronix.com/3145FM.html
That said, I also had to double up on stock orings in lieu of the huge oring that came with the fuel injectors. They don't leak and work fine. Just won't fit in a stk series four fuel rail unless you take action. When you take action to get them to fit, will you be able to see 'em at a later date to someone else???>? Matters not to me 'cause I don't sell squat.
http://www.racetronix.com/3145FM.html
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM