Heres mine, its coming along pretty well!

 

Heres another.

 

 

here is my new street port. it is a whole lot cleaner than it looks in the pic

 

wow, looks sweet man...

i don't have any "project" pics but they are in a garage

 

 

here is my bedroom closet still waiting for my last box of parts then it's time to go to work

 

 

Wow, your turbo alone probably cost more than my car.... (yes, i know its a large picture, but it's all I have!)

 

I put a stereo in my car to drown out the exhaust leak, until I get around to putting a new manifold gasket on.

 

 

 

sorry for the low resolution, i forgot to put the camera on high when taking the pics.

 

I can just imagine Scott at an interview

"Scott, I notice that your suit .. well, it smells funny"

LOL, I know how fragrant new tires are

Anyway, the RX-7 doesn't look much different than it does in this pic:



But it's now fully bolted in, with all the wiring complete, and a custom ECU mount (since the roll bar required cutting away two of the studs for mounting it, and is now in the way), the rear harness is fully seated and bolted.plugged in, and the remaining front harness is going back together now.

If you're bored, Here is a list of things left to do

PaulC

 

Looks like were all making some good progress, but Scott you need to get working!

 

It is in the car! I don't know how to install the CAS. I might ask in this forum.

 

Thats the 89+ N/A motor you're building right?

 

Here's my little project in the works! Plan on shoehorning it into my 300ZX.

BTW, there are 2 more turbo's on the other side, and it should be making about 2100HP when I'm done with it....

 

Oops...forgot the pic!

 

Ummmmm. Quad Turobs.... Too bad it is a Pist-on engine!

 

i wouldnt care if it was piston or not, 4 turbos would make a hole hell of alot of noise, just my 2 cents

 

heres the pos car right now in the driveway

 

heres just a few of the parts for it, many more in the car

 

Hey niner. Your wheel is on the wrong side of the car. I do like the dark color though.

 

MikeL and 1FastT2, looking real good!! what kind of power you guys expecting?? I just dropped my engine off yesterday, getting extend port, hurleys, fd rotor housings and fuel pump, fcd, 3" exhaust, intake, 4 puck clutch/ flywheel, 720's, and ported turbo! hopefully itll be up in two eeks or so. ill take pics and post em real soon!