nice exhaust! love the GP ones. :icon_tup:

Corksport 3inch single
http://i15.photobucket.com/albums/a3...arstuff001.jpg
http://i15.photobucket.com/albums/a3...arstuff010.jpg

I have an older Ti system thats going on my vert later this year in my basement. But I have no clue who makes it. The can says HKS but I wasnt aware that HKS made a Ti system for the FC.

heres one that you wont see very often, zoomers exhaust:
http://img389.imageshack.us/img389/5388/teh7006do6.jpg

This is a great thread.
Good for people looking for exhaust.
I always knew I should'nt get apexi N1.(I didn't)
It's not for me. It looks loose, doesnt look like it belongs. like hanggig.. something..

I agree, I see them often, but they just seem like they dont fit with the car, really clean car though comet, the rims and wing look awesome with that car.

Thanks for the comment!

I'm sure you've seen enough of these, RB

http://i48.photobucket.com/albums/f2...n/IMG_2376.jpg
http://i48.photobucket.com/albums/f2...n/100_1503.jpg
http://i48.photobucket.com/albums/f2...n/100_1504.jpg
http://i48.photobucket.com/albums/f2...n/100_1500.jpg

tHIS is my RB

http://i8.photobucket.com/albums/a38...3/PICT1787.jpg

very nice picture. i was wondering if you can make a clip of your exhaust. i wanna hear how it sounds. i have a dilema, dont know whether i should get the racing beat full exhaust or the apexi N1. opinions guys? thanks

great thread btw.

Dual Magna Flows. They sound awesome with the RB header to Y-pipe.

http://i8.photobucket.com/albums/a44...d/IMG_1936.jpg

http://i8.photobucket.com/albums/a44...d/IMG_1921.jpg

http://i8.photobucket.com/albums/a44...d/IMG_1920.jpg

I've since re-aligned the mufflers, and they sit perfectly in the bumper cover cut out.

corksport single

i have mine pointed a little to the right just to make sure the people i pass can hear me lol

right before paint number 2
http://i31.photobucket.com/albums/c3...2/HPIM5031.jpg
now looks like this only s5 body
http://i31.photobucket.com/albums/c3...o/8a1d0aca.jpg

Here's pic of my exhuast, it's not my rx-7 though we just used it to tack weld the exhaust together since that car has all brand new rubber hangers.
http://i124.photobucket.com/albums/p...t/DCP_0166.jpg
http://i124.photobucket.com/albums/p...es/exhust2.jpg

How big are your magna flow i mean the inlet an the tip.

Custom done magnaflows.

http://img.photobucket.com/albums/v2...c/P1010010.jpg

I saw one Borla system in there, but anyone else got any more pics of a Borla?

here are mine don't know if you can see them to well -dual N1 Black-

If you guys have audio clips to go along with your photos, or a youtube video, post it here:
http://howto.globalvicinity.com/gv_w...i=66&co=1&vi=1

It's our attempt to have an objective exhaust comparison!

Either 2 1/4 or 2 1/2 inlet (whatever the RB N/A exhaust is)
And the outlet is 4 inches outside diameter I believe.

well I just spent 825.00 on a new racing beat dual exhaust setup (header, pre silencer, Y pipe, and extension tubes)

Dave

apexi n1

Racing beat :icon_tup:


http://img294.imageshack.us/img294/1...2412io7.th.jpghttp://img470.imageshack.us/img470/5...austiu9.th.jpg

does anyone have the apexi n1 dual? the one that has the two smaller silencers that exit on the left