RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Show me pics of your exhaust (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/show-me-pics-your-exhaust-611530/)

SpooledupRacing 01-06-07 07:15 AM

Show me pics of your exhaust
 
OK guys I am putting on a couple muffler next weeked and wanted to see how u guys have your mufflers pointed on your FC.. show me some pics of the angles or strait on etc that u have for your mufflers

Dave

theory 01-06-07 11:09 AM

2 Attachment(s)
Here you go.

SpooledupRacing 01-06-07 11:15 AM

thx.. anyone else.. I am looking for duel exhaust to but either works I just wanted to see who is tilting their exhaust and who has it comming strait out

Dave

876portturbo 01-06-07 11:27 AM

I will post mine a little later, hey Theory is that a DNA muffler? Summitracing sells those I was wondering how it sounds, I was thinking about putting one of those inline before my magnaflow to quiet it down

siguysdad 01-06-07 11:50 AM

1 Attachment(s)
this is the PE one something to go off of tho.

theory 01-06-07 01:37 PM


Originally Posted by 876portturbo
I will post mine a little later, hey Theory is that a DNA muffler? Summitracing sells those I was wondering how it sounds, I was thinking about putting one of those inline before my magnaflow to quiet it down


Yeah it is a DNA, it is louder then my stock duals I had on previously. It has a deeper tone, I haven't heard anything else like it. It was weird at first but it definetly grew on me, I love it now.

876portturbo 01-06-07 01:44 PM

Thats cool, thanks for the info, I think I'll purchase it soon

Fault Bucket 01-06-07 02:30 PM


Originally Posted by theory
Here you go.

That's a clean looking system, very much along the lines of what I'd like to have built for my car.

Is that a turbo or N/A? What model/part # is that muffler?

-chris

.Zero 01-06-07 02:35 PM

1 Attachment(s)
my turboII

SpooledupRacing 01-06-07 06:57 PM

I bought these ebay mufflers and am going to put them on strait forward now that I see those!!!!

http://images.andale.com/f2/127/115/..._RS310TX2k.jpg

Dave

SpooledupRacing 01-06-07 07:01 PM


Originally Posted by theory
Here you go.


btw it looks like your muffler got put on backwards.. I think those marks on it are supose to be arrows showeing the flow of exhaust which means they should be pointing to the tip not to the engine

Dave

papiogxl 01-06-07 07:04 PM


Originally Posted by SpooledupRacing
I bought these ebay mufflers and am going to put them on strait forward now that I see those!!!!

Dave

You may want to be careful about those, they are fiberglass packed, so the rotary exhaust heat will burn it rather quick, after that they will be loud.

TehMonkay 01-06-07 07:08 PM

I have a greddy muffler coming straight out, i will get pics tommorow. Looks good except the dent in it >:(

metal 01-06-07 07:11 PM

Heres mine, slight angle

https://img443.imageshack.us/img443/6776/stickergy9.jpg

staticguitar313 01-06-07 07:16 PM

Borla stainless duals, unfortunately something fell off a truck and ruined part of my Y-pipe so they dont line up right anymore. Gotta get it fixed. Sound amazing, deep an full without any raspyness at all. True quality. Look failrly stock to most people, other than the inner sleeves on the tips and the full stainless construction, so no ricer attention.


http://i37.photobucket.com/albums/e5...f/Stuff037.jpg
http://i37.photobucket.com/albums/e5...f/Stuff033.jpg
http://i37.photobucket.com/albums/e5...9-13-06028.jpg

papiogxl 01-06-07 07:26 PM

my temporary setup, doesn't sound too bad either.

http://myspace-655.vo.llnwd.net/0093...32617655_l.jpg

dsmrx7 01-06-07 07:56 PM

Here's a pic of my Apexi N1 on my old FC:
http://i20.photobucket.com/albums/b2...g?t=1168134597

Here's the "new" one I'm planning on putting my RHD FC:
http://i20.photobucket.com/albums/b2...g?t=1168134825

RedShayla 01-06-07 08:01 PM

Racing Beat
http://i130.photobucket.com/albums/p.../Serena/13.jpg

http://i130.photobucket.com/albums/p...1bf9d474-1.jpg

http://i130.photobucket.com/albums/p...1OexdlK_fs.jpg

http://i130.photobucket.com/albums/p...4aRLhtd_fs.jpg

http://i130.photobucket.com/albums/p...7tJrLIe_fs.jpg

RedShayla 01-06-07 08:02 PM


Originally Posted by dsmrx7
Here's a pic of my Apexi N1 on my old FC:
http://i20.photobucket.com/albums/b2...g?t=1168134597

Here's the "new" one I'm planning on putting my RHD FC:
http://i20.photobucket.com/albums/b2...g?t=1168134825

Hey I like your old FC. Beautiful color. I heard u guys just had an earthquake, did u feel it ?

Shay

C.A.R 01-06-07 08:45 PM

2 Attachment(s)

Originally Posted by SpooledupRacing
I bought these ebay mufflers and am going to put them on strait forward now that I see those!!!!
Dave

I bought the same ones... They are pretty loud when you remove the silencers and just a little louder than factory with the silencers in... I have driven with them about 1500 to 2000 miles and they still sound exactly the same... I attached pics of them...

https://www.rx7club.com/attachment.p...d=214866&stc=1
https://www.rx7club.com/attachment.p...d=214867&stc=1

a13btrx7@hotmail.com 01-06-07 08:55 PM

zero what type of mufflers are you running . they look good on our t2 , i to am planning on getting dual N1's on my car . like a fat muffler though 4" on the duals and making them stick up a little bit on straight . but i want to look at more pics to see how good they look on an fc

SpooledupRacing 01-06-07 09:01 PM

https://i130.photobucket.com/albums/...4aRLhtd_fs.jpg


somone above owns a DELOREAN!!!!!!!!

staticguitar313 01-06-07 09:20 PM

two very neat 80s sports cars, very nice, you get 7 thumbs up!!

NOPR 01-06-07 09:26 PM

heres a pretty old picture of mine. its a rb downpipe to borla then an apex'i catback.
http://img.photobucket.com/albums/v1...E/DSCN0476.jpg

theory 01-06-07 11:50 PM


Originally Posted by Fault Bucket
That's a clean looking system, very much along the lines of what I'd like to have built for my car.

Is that a turbo or N/A? What model/part # is that muffler?

-chris


It is for my N/A. I believe this is the part number from the DNA site: 1021-2

http://www.dnamufflers.com/DNA/street.html


All times are GMT -5. The time now is 11:08 AM.


© 2024 MH Sub I, LLC dba Internet Brands