shopping list for my 87 T2
#1
Full Member
Thread Starter
Join Date: Jun 2004
Location: Panama City, Panama
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
shopping list for my 87 T2
hey guys i was wondering what you guys think of the following items which i might order. if you have any other suggestions please right em down.
-Greddy Turbo Timer
-Apexi BOV
-ACT 4 Puck Clutch
-Platinum NGK Spark Plugs
-Turbo Harness
-Greddy Turbo Timer
-Apexi BOV
-ACT 4 Puck Clutch
-Platinum NGK Spark Plugs
-Turbo Harness
#3
Full Member
Thread Starter
Join Date: Jun 2004
Location: Panama City, Panama
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
yeah all regular maintence except for the plugs...which i want to get. ehm as for the boost gauge i have an old school racing beat one that came with the car...i just have to reset it and hook it up.
#4
platinums are hella expensive, but if your willing do dish out the dough, by all means. and with the 4 puck, you might want to consider a flywheel resurface, and if its a kit with a harder pressure plate, you'll probably want some new oem clutch cylinders and maybe a stainless steal line. And IMO the apexi BOV is just a nametag, the stockers are very adequet, if you want an atmospheric vented BOV just cap the bung on the turbo inlet duct for the stocker and put a check valve on the end of the stocker, and make sure the stock BOV is sitting level.
Whats a turbo harness?
Whats a turbo harness?
#5
Former Moderator. RIP Icemark.
Originally Posted by gxlspeeder
platinums are hella expensive,
But if he really wants a good plug, then he wants Iridiums. The ND/Denso IRE01-27and IRE01-31 are the best plugs for any amount of money for a rotary engine.
#6
Full Member
Thread Starter
Join Date: Jun 2004
Location: Panama City, Panama
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
well i just replaced the whole entire hydraulic system for the clutch so i guess that'll be good. as for the flywheel i dont think i'll be needing one unless it is necessary to get one then i'd just go for the street/strip kit from ACT. platinums are better than oem its not like i'm buying iridium plugs that go for 34$ each. as for the blow off valve, i really don't want the sound i want to protect my turbo and i hear its a good way of doing it. (edit: can't say i dont want the sound lol.) ehm sorry typo, its turbo timer harness.
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM