Setting TPS.... cold...
05-15-07, 12:07 AM
#1
Becoming pure track...
Thread Starter
iTrader: (1)
Join Date: Feb 2005
Location: Olympia, WA
Posts: 1,069
Likes: 0
Received 0 Likes
on
0 Posts
Setting TPS.... cold...
Well, I was wondering, if I did the TB mod, all cold start assist stuff removed, what is the method for setting TPS?
Do I want to set it to 1k even when cold? TPS was set right on before I pulled the TB off. But I removed the TPS when I did the TB mod so that I could clean the TB up a little. TPS + water = bad...
Thanks.
Do I want to set it to 1k even when cold? TPS was set right on before I pulled the TB off. But I removed the TPS when I did the TB mod so that I could clean the TB up a little. TPS + water = bad...
Thanks.
05-15-07, 06:25 AM
#3
Lives on the Forum
Should be no problem...
The problem with setting the TPS with the cold-start still intact, is that the cold start cam is still engaged.
Since you pulled all of that, you should be able to set the TPS no problem.
-Ted
The problem with setting the TPS with the cold-start still intact, is that the cold start cam is still engaged.
Since you pulled all of that, you should be able to set the TPS no problem.
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
rx8volks
Canadian Forum
0
08-13-15 04:55 AM