SpAm@FC

iTrader: (4)

Hi guys!

another interchange question...

is the servo pump from a Non Turbo the same as the servo pump from a Turbo?
I think they look exactly the same, both are from Koyo (can't see any numbers)

and...

the stock pulleys on the FC... are they made of aluminium?

thx 4 your answers

Tofuball

All the pullies I've seen on my FCs are steel.

I dont know if the servo pumps are the same, but I'm rather sure that they are. Might want to wait for somone who has experience in that to respond :p

CompuBob

whats a servo pump?
is it what they call power steering in Australia?
and yes, I believe the pully's are steel

Tournapart

iTrader: (4)

well he/she is in Austria, and i believe he/she means a water pump but i could be wrong

SpAm@FC

iTrader: (4)

servo pump = power steering, sorry

thx @ steel pulleys...

anybode else knows if the power steering pumps are interchangeable?

1987RX7guy

iTrader: (3)

I believe the TII's had different sensor inputs from the N/a's. One was RPM and other was road Speed sensing. I don't know which was which but I do remember the difference. Also there were some that had different lines on the pump. I've personally seen two types.

SpAm@FC

iTrader: (4)

and whats about the mounting bracket? i mean the big one where the pump is mounted, and the bracket itself is mounted on the motor... i only want to chrome that part and pulleys

Icemark

The bracket is the same regardless of it it is Turbo or not.

The bracket is made of cast aluminum.

SpAm@FC

iTrader: (4)

big thx!

will get the stuff chromed and powdercoatet in the next week...