2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

series v. I need a picture of fuel injector sender/relay

Thread Tools
 
Search this Thread
 
Old Jun 6, 2007 | 03:36 PM
  #1  
KeithTurbo's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jan 2006
Posts: 5
Likes: 0
From: Burque
series v. I need a picture of fuel injector sender/relay

I was recently towing my car and in the process ripped a piece of my harness apart. there is a six prong white connector that I believe sends to the injectors. It is located in front/under the stock airbox and i have ripped the wires, out of the actual connector. those six are the only wires that I've yet to reconnect and its because they are different colors on either side, if i could get either a picture of or someone to tell me what six go where i would be very greatful.

thanx,

rotarded
Reply
Old Jun 6, 2007 | 03:53 PM
  #2  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
https://www.rx7club.com/showthread.p...enoid+resistor

https://www.rx7club.com/attachment.p...1&d=1173581265

Forget the BS and just scroll to the picture at or near the bottom of the page. It's the one on the right. Bottom side shown.
Reply
Old Jun 6, 2007 | 04:17 PM
  #3  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
https://www.rx7club.com/forum/showth...sistor+package

That link shows the solenod resistor and a diagram of it...sorta.

The center socket ( B ) FEEDS 12v to the resistors and the result comes out the other four wires to the injectors.

With the exception of the center socket, the other four can be in any order whatsoever.
Reply
Old Jun 6, 2007 | 06:27 PM
  #4  
KeithTurbo's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jan 2006
Posts: 5
Likes: 0
From: Burque
Re:

Thanks for the diagram but it didnt help very much. If someone out there could take a look at their series five fuel injector resistor connector and tell me what wires go to what I would be ecstatic. check it,
on the resistor side of the connection with the clip on the bottom on the left two black wires over and under, a white and a sky blue over and under in the middle and on the right a yellow over pink set of wires. I need to know how these connect in relation to the following wires on the harness side: three blue with red stripe, two blue with green stripes and one green with red stripe.
any one with a series 5 could easily help me by taking a quick look. thanks alot!
Reply
Old Jun 6, 2007 | 08:34 PM
  #5  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
There's no such thing as a fuel injector resistor relay.

What you mean is the fuel pump resistor/relay assy located in front of the afm.

Not a big deal but clarifys what is being wanted to be looked at.

Got you back to the top anyway.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM
86rxNa
2nd Generation Specific (1986-1992)
2
Aug 11, 2015 11:51 AM




All times are GMT -5. The time now is 08:23 AM.