SAiamNE

Drove my 7 today and noticed the seatbelt light doesn't come on when im driving and its not plugged in...
Checked the fuse box and the fuse had been taken out..
So i replaced it.. I didn't hear a "click" or anything when putting it in though, should it?
Seatbelt light still didn't come on...

I don't really care that the seatbelt light doesn't come on. I'm scared that maybe if the seatbelt one doesn't work, nothing else does.
Everything lights up on start up except the one in the top 2nd over from the right (ABS). I don't have this so i don't worry about it.
Although the one in the bottom far left corner doesn't light up at all.
Canadian 1990 GXL....

Could someone please tell me why my seatbelt light isn't comming on, and what is in the far bottom left hand corner?

Thanks

Project84

check the bulb. And buckle up.

Scott 89t2

ummm is it surposed to come on? I've never tryed but I doubt it. it probably only comes on for the first 10 secs at start up.

Dltreezan

iTrader: (3)

d00d those lights never fail!! And the plastic trim never breaks!! WTF is the world coming to??/?slash?




sorry I had to im not really that much of an ***

Icemark

The seat belt light should only come on for the first 14 seconds of turning the key on. After that the CPU shuts down the circuit.

If it is not coming on at all, the you probably have either a bad bulb, bad solder joint in the Clock/idiot light panel, or a bad CPU.

SAiamNE

Well it does come on at start up. But does not stay on for 14 seconds. It turns right off when all the rest do.
How hard is it resolder all the joints? much work?
Can anyone tell me what the light is in the bottom left had corner on a Canadian model GXL? I can see there is something in the back but no light is comming on and i can't quite make out what it is.

Thanks

Kenteth

lol mine beeps at me randomly whenever I drive "spirited." the beep.. beep beep, is always a sign of fun.

n4ji

iTrader: (1)

Without wearing your seat belt? That's like signing your own death certificate.

Kenteth

lol, no it does it while wearing it. Wearing my seatbelt is 100% always. Its habbit now. Open door, sit down, grab seat belt with left hand, key in ignition with right hand. then right hand grabs seatbelt from left hand, Right hand latch seat belt, right hand start car.

Icemark

That would be a bad thing... why are you laughing?

My5ABaby

iTrader: (7)

Ok, back from the dead (at least I search).

Anyways, I'm just wanting some verification. With my key to the ON position my seat belt warning light illuminates. After starting my car the light does not come on if I unbuckle nor does it stay on for 14 seconds. This has happened with 2 different idiot clusters.

Bad CPU?

daviddeep

iTrader: (4)

In an S5 car like the OP has, if you want to test to see if the seatbelt warning light is working once the engine is running, you can disconnect the shoulder belt from the clip that rides in the window track. Mine light comes on within a second or two of doing this.

It never lights up if you leave off the lap belt, and I wish it did. That might remind the passenger (usually my wife) to put that on too.

My5ABaby

iTrader: (7)

Nice info daviddeep. I guess I should clarify that I have an S4.

daviddeep

iTrader: (4)

Sorry, My5Ababy. I should have checked your profile. I also didn't notice how old this resurrected thread was either.

Icemark

yep, try re-soldering the main panel in the CPU (the large one)

My5ABaby

iTrader: (7)

No problem. The poster is supposed to clarify and I didn't.

Awesome. Well... not really awesome but at least I know what to do now. Thanks.

Icemark

If that doesn't solve it then you are looking at pinched or shorted wires at the plug, at the back of the seat.

My5ABaby

iTrader: (7)

If that doesn't involve removing the carpet I'll look at that first. If it does, I'll take one of my extra CPU's and resolder it (which I'll probably do anyways).