seat swap
It's only "easy" to make custom seat mounts if you don't care about the installed height. Adapting the stock sliders to a different seat base- which is definitely the simplest approach- can leave the seat sitting further off the floorpan than stock.
Depending on your height, this may or may not matter.
@OP...do yourself a favor and remove your stock seats (while they're out, vacuum all the amazing crap that's accumulated under there...).
Now, look at the way the sliders are attached to the seatpan- pay special attention to the passenger side because it's the weirdest.
Then look at the seats you want to swap to- you'll see what's different and what will have to be done.
Depending on your height, this may or may not matter.
@OP...do yourself a favor and remove your stock seats (while they're out, vacuum all the amazing crap that's accumulated under there...).
Now, look at the way the sliders are attached to the seatpan- pay special attention to the passenger side because it's the weirdest.
Then look at the seats you want to swap to- you'll see what's different and what will have to be done.
