2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

sea foam Q?

Thread Tools
 
Search this Thread
 
Old Nov 7, 2006 | 07:41 PM
  #1  
rx7vadim's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 598
Likes: 0
From: miami
sea foam Q?

Is it neccesary to change oil after u used sea foam (vacuim sucking way)?
Reply
Old Nov 7, 2006 | 07:43 PM
  #2  
camman's Avatar
Full Member
Tenured Member 15 Years
 
Joined: Dec 2005
Posts: 189
Likes: 0
From: utah
It is a good idea.
Reply
Old Nov 7, 2006 | 07:58 PM
  #3  
rx7vadim's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 598
Likes: 0
From: miami
what is
Reply
Old Nov 7, 2006 | 08:02 PM
  #4  
Rotarctica's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Sep 2006
Posts: 232
Likes: 0
From:
It's a good idea to change the oil after using it, is what he said.
Reply
Old Nov 7, 2006 | 10:05 PM
  #5  
anewconvert's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (1)
 
Joined: Oct 2005
Posts: 1,017
Likes: 0
From: Raleigh, NC
Never hurts. Might as well just do it before you do an oil change.


BC
Reply
Old Nov 8, 2006 | 07:56 AM
  #6  
SpooledupRacing's Avatar
Banned. I got OWNED!!!
 
Joined: Aug 2006
Posts: 3,717
Likes: 0
From: Comstock Park, MI 49321
if through a vac line then no u dont have to only if u use it as a oil treatment then yes!

however changing your oil is never a bad thing so I would say if it is due then do it if not dont worry about it and do it when it is due
Reply
Old Nov 8, 2006 | 08:52 AM
  #7  
Chuck's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (2)
 
Joined: Mar 2004
Posts: 690
Likes: 0
From: Charlottesville, VA
I use Seafoam instead of water when I do the vacuum sucking job. Here's what I do. On Thursday I add a can of Marvel Mystery Oil to the crankcase. (I suck a pint or so of oil out first) . Then on Saturday, I run a can of Seafoam through a vacuum line. After that's done, I change oil and filter. Drain the oil. Crank the engine and let it run for 10 secs or so to clear out the filter and the oil cooler. Replace with new oil and filter and away I go.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bojmend
General Rotary Tech Support
2
Oct 7, 2015 09:32 PM
SakeBomb Garage
SakeBomb Garage
0
Sep 4, 2015 05:20 PM
SakeBomb Garage
Vendor Classifieds
0
Sep 4, 2015 05:19 PM




All times are GMT -5. The time now is 12:02 AM.