scum bag tried stealing my car! HELP.
#1
scum bag tried stealing my car! HELP.
Ok so I'm pissed right now!
Basically some **** tried stealing my rx7 once I ran into the store tonight and Fucked up my lock on the drives side door lock.
Got it open but it took some effort and wasn't normal feeling now I can't even open the door and to add to my bad luck the passengers side won't open from the outside due to something fail in the lock a few months ago...I know....I know I should have addressed it then.
So now I cant open the damn car at all! Errrr......
Btw I have a convertible no hatch to crawl through.
My questions are does anyone now where I can buy a complete lock set new and do they now how to enter the car without keys...obviously not through the top or braking a window.
Soo pissed but glad those scum bags didn't get her!
Next set is a bad *** alarm!
Help please don't want to spend crazy amounts of cash just to get it open from some locksmith.
Basically some **** tried stealing my rx7 once I ran into the store tonight and Fucked up my lock on the drives side door lock.
Got it open but it took some effort and wasn't normal feeling now I can't even open the door and to add to my bad luck the passengers side won't open from the outside due to something fail in the lock a few months ago...I know....I know I should have addressed it then.
So now I cant open the damn car at all! Errrr......
Btw I have a convertible no hatch to crawl through.
My questions are does anyone now where I can buy a complete lock set new and do they now how to enter the car without keys...obviously not through the top or braking a window.
Soo pissed but glad those scum bags didn't get her!
Next set is a bad *** alarm!
Help please don't want to spend crazy amounts of cash just to get it open from some locksmith.
Last edited by 88rota; 01-29-13 at 10:14 PM.
#2
#turbodavebuilt
iTrader: (50)
I was able to open the door when keys were locked in with a cardboard.has to be about 6" long 4" wide and slide it between window and door straight down by the door handle and it will push down on a lever which will open the door.i haven't done that in years but I've done it quite a bit when I owned my turbo II.
#3
Cake or Death?
iTrader: (2)
Opening the car is dead simple, I just did it last week.
Peel off the lower outside window trim/wiper.
Use a ruler (or any flat strip of material) to push down the door latch operating rod, it's the only plastic connector thingie you can see.
Takes about 10 seconds.
A locksmith might be able to save your lock cylinder.
I had all my cylinders rebuilt with master keys, cost about $100.
Peel off the lower outside window trim/wiper.
Use a ruler (or any flat strip of material) to push down the door latch operating rod, it's the only plastic connector thingie you can see.
Takes about 10 seconds.
A locksmith might be able to save your lock cylinder.
I had all my cylinders rebuilt with master keys, cost about $100.
#5
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Wait you got a Vert?..store him in the trunk!
Nice to know there is a thread on how to get into an Rx7 without keys...(???!!!!)
Trending Topics
#10
It's a vert not a hatch^^^
Thanks clokker for the support. Not trying to give bad ideas here.
I love my seven and don't want it f'd up more.
How exactly do I get the weather strip off ??
<a href=http://s970.photobucket.com/albums/ae182/88rota/?action=view¤t=IMAG1299-1.jpg target=_blank><img src=http://i970.photobucket.com/albums/ae182/88rota/IMAG1299-1.jpg border=0 alt=></a>
Thanks clokker for the support. Not trying to give bad ideas here.
I love my seven and don't want it f'd up more.
How exactly do I get the weather strip off ??
<a href=http://s970.photobucket.com/albums/ae182/88rota/?action=view¤t=IMAG1299-1.jpg target=_blank><img src=http://i970.photobucket.com/albums/ae182/88rota/IMAG1299-1.jpg border=0 alt=></a>
#13
I was able to open the door when keys were locked in with a cardboard.has to be about 6" long 4" wide and slide it between window and door straight down by the door handle and it will push down on a lever which will open the door.i haven't done that in years but I've done it quite a bit when I owned my turbo II.
Now time for new locks and a sikk axx alarm oh yeah and some tires lol.
Thanks guys!
#16
This is my social media.
iTrader: (22)
Join Date: Jan 2006
Location: WA
Posts: 2,744
Likes: 0
Received 0 Likes
on
0 Posts
OP, not only do I feel bad that someone tried to break into your car... But also for the fact that a lot of people responding in this thread haven't read a single word of your initial post. haha
#17
Driving RX7's since 1979
iTrader: (43)
Join Date: Aug 2001
Location: So Cal where the OC/LA/SB counties meet
Posts: 6,096
Likes: 0
Received 8 Likes
on
8 Posts
To the OP, get any door lock lock off an 2nd Gen RX7 parts car or buy one from Mazdatrix, take it to a lock smith and have them "key" it to your regular key.
Installing is actually quite easy as it's held in place with a simple C spring. You just pull the door card, remove a couple 10MM bolts, not so secret trick is to also take out the philips screws that holds the door jamb locking mechanism so it can drop down providing remove wiggle, then massage the door handle out from the outside.
#18
Full Member
iTrader: (1)
Join Date: Jun 2009
Location: Burnaby
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Actually, a couple did.
To the OP, get any door lock lock off an 2nd Gen RX7 parts car or buy one from Mazdatrix, take it to a lock smith and have them "key" it to your regular key.
Installing is actually quite easy as it's held in place with a simple C spring. You just pull the door card, remove a couple 10MM bolts, not so secret trick is to also take out the philips screws that holds the door jamb locking mechanism so it can drop down providing remove wiggle, then massage the door handle out from the outside.
To the OP, get any door lock lock off an 2nd Gen RX7 parts car or buy one from Mazdatrix, take it to a lock smith and have them "key" it to your regular key.
Installing is actually quite easy as it's held in place with a simple C spring. You just pull the door card, remove a couple 10MM bolts, not so secret trick is to also take out the philips screws that holds the door jamb locking mechanism so it can drop down providing remove wiggle, then massage the door handle out from the outside.
To the OP: Glad they didn't get away with your baby I just found out this morning someone tried to steal my first gen overnight. Jokes on them, no battery in it since it's not running properly atm HAHA!
#23
Junior Member
Join Date: Aug 2011
Location: California
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts