S5 pressure sensor differences
Thread Starter
Senior Member
Joined: Dec 2001
Posts: 297
Likes: 0
From: Longmont, Co
S5 pressure sensor differences
Is there any difference between the S5 and S4 pressure sensors? Specifically, are the input pins the same? I ask because I noticed the upper right pin on my pressure sensor was missing from the wiring harness, this should be +12V line according to Paul Stokes' fcd guide for an S4.
I've been using the pressure sensor as the throttle input for my SAFC, so I know it is working, though it seems strange it can do so without power. Before I connect my fcd though, I'd like to know if the other pins are the same as on Paul Stokes' page.
I've been using the pressure sensor as the throttle input for my SAFC, so I know it is working, though it seems strange it can do so without power. Before I connect my fcd though, I'd like to know if the other pins are the same as on Paul Stokes' page.
I'm a boost creep...
Joined: Jan 2002
Posts: 15,608
Likes: 8
From: Auckland, New Zealand
Originally posted by incendui
Ok, all I'd really like to know is if I can use the Vref signal in place of the +12V power input on the fcd.
Ok, all I'd really like to know is if I can use the Vref signal in place of the +12V power input on the fcd.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
stickmantijuana
20B Forum
8
Aug 18, 2015 02:46 PM
