2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

S5 NA stock vacuum hoses

Thread Tools
 
Search this Thread
 
Old Jan 31, 2008 | 01:41 PM
  #1  
rotoman2's Avatar
Thread Starter
Full Member
Tenured Member: 15 Years
 
Joined: Feb 2006
Posts: 145
Likes: 0
From: Michigan/ Florida
S5 NA stock vacuum hoses

Anyone have a diagram or pic of the S5 NA vacuum hoses coming off the rat's nest under the intake manifold. There is a large (1cm) line (connected I think to the air bypass valve) with a branch having 5 small nipples that connect to somewhere. I've searched hours for a hose diagram wol and the schematic doesn't show hose connections. Thanks

Reply
Old Jan 31, 2008 | 05:00 PM
  #2  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
Connects to a piece of plastic that has five nipples total?? OMP spider if that is what you are describing.
Reply
Old Feb 1, 2008 | 01:55 PM
  #3  
rotoman2's Avatar
Thread Starter
Full Member
Tenured Member: 15 Years
 
Joined: Feb 2006
Posts: 145
Likes: 0
From: Michigan/ Florida
Question vacuum lines

Thanks Hailers, but, I don't quite get it, yet. Is the OMP spider elliminated on the S5, so 4 of the branches go to each OMP valve and the 5th connects to the vacuum port coming up out of the block?
Reply
Old Feb 1, 2008 | 03:13 PM
  #4  
well uhhh's Avatar
I wanna go fast
Tenured Member 05 Years
 
Joined: May 2006
Posts: 378
Likes: 0
From: North Bend, WA
the four run from the oil nozzles as you said but the one line that they lead to attaches to the big nipple on the back of the uim (there are four nipples stacked on top of eachother) next to the throttle linkage. if you go to the emissions section of the fsm it will tell you all you need to know for vac routing. There is a link to this in the faq section.
Reply
Old Feb 1, 2008 | 03:19 PM
  #5  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
Originally Posted by rotoman2
Thanks Hailers, but, I don't quite get it, yet. Is the OMP spider elliminated on the S5, so 4 of the branches go to each OMP valve and the 5th connects to the vacuum port coming up out of the block?

It'll connect to a source prior to the throttle plates. One with no vacuum but filtered air. Oppps. I can't find a picture of where it connects on a series five. I've no S5 to look at.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sYnth.
Build Threads
0
Aug 19, 2015 06:27 PM
pzr2
General Rotary Tech Support
1
Aug 15, 2015 08:29 PM




All times are GMT -5. The time now is 05:39 PM.