S5 NA to S4 T2 Swap - Need Help
#26
Junior Member
Thread Starter
Well..I am an idiot, there was a small vacuum leak on the back side of the intake pipe on the bend right after the AFM, also the throttle was completely shut, a small adjustment there and that little hole plugged up and the car started up with no problems.
Thanks for all your help guys!
Thanks for all your help guys!
#28
Junior Member
Thread Starter
I wish it was that simple...I still have to hook up a pile of things and get a trans mount welded. The trans mount thing is due to the car being an NA auto chassis, and the trans in currently being an s4 t2. Luckily I have a guy very familiar with RX7's that will help me weld that up.
While I have your attention, could you tell me which set of injectors to upgrade first or if I should do both and what supporting mods I would want?
While I have your attention, could you tell me which set of injectors to upgrade first or if I should do both and what supporting mods I would want?
#30
Junior Member
Thread Starter
hmmm you have a valid point, I will get that done seeing how it is relatively cheap to do anyways. Thanks again Satch, I really appreciate the help you've provided.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
gtcd
1st Generation Specific (1979-1985)
3
09-17-15 01:15 PM
gabescanlon
3rd Generation Specific (1993-2002)
2
09-15-15 06:57 AM
jakeishness
2nd Generation Specific (1986-1992)
11
09-11-15 11:33 AM