S4 vs S5 front fenders question
06-12-02, 11:53 AM
#1
SCCA Rookie
Thread Starter
Join Date: May 2001
Location: Sterling Heights, MI
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
S4 vs S5 front fenders question
Are they the same? I've got a white '90 TurboII that's got a messed up drivers side front fender, and this junkyard around the area has a good white fender, but it's an '88 car. Will they match up?
06-12-02, 11:58 AM
#2
Former Moderator. RIP Icemark.
No, the series 5 T2 used a different fender than any other FC.
You will need to replace the fender with another series 5 T2 fender.
The part number is: FC17-52-211 for the T2 fender and FC01-52-211 for all other FCs.
You will need to replace the fender with another series 5 T2 fender.
The part number is: FC17-52-211 for the T2 fender and FC01-52-211 for all other FCs.
06-12-02, 12:06 PM
#3
Rotary Enthusiast
Join Date: Aug 2001
Location: Tallahassee, FL
Posts: 1,402
Likes: 0
Received 0 Likes
on
0 Posts
Not quite sure about that Icemark. IIRC, the fender is the same, with the exception of the, uh, "bottom part" (under the rubstrip, behind the front bumper) and the rubstrip itself. I don't think that Mazda changed the actual fender itself...
I could be (and probably am) wrong, though
Brandon
I could be (and probably am) wrong, though
Brandon
06-12-02, 12:20 PM
#5
Former Moderator. RIP Icemark.
Yep, call the dealer if you don't believe me... He'll give you those same two part numbers for a series 5 car.
One without the spoiler/ ground effects (the standard series 5 fender) and one for the T2 which came standard with the ground effects/Spoiler.
One without the spoiler/ ground effects (the standard series 5 fender) and one for the T2 which came standard with the ground effects/Spoiler.
