s4 turbo swap to my s4 na
#1
highway to the dangerzone
Thread Starter
Join Date: Jul 2005
Location: indiana
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
s4 turbo swap to my s4 na
i have a s4 with less than 30 k on motor. and a blown s4 t2 motor. i am good at fixing things but not anything aftermarket. hopefully i dont get burned.
the turbo2 blew cause of no oil pressure.
questions are simple
if i use the t2 harness and ecu, will the rtek 7 (using the t2 ecu)work for it still. i am guessing yes cause you tune yourself right.
what wideband should i go with and can it work with the rtek. or should i go piggy back fuel control.
i am new with turbos, i am using the stock turbo until i learn more.
if i use the stock turbo, what exhaust size should i run, i work at CarX so i can build my own. should it be wide open or somewhat small.
i was also going to either top mount and have some kind of 02 cooler on it or front mount, using exhaust tubing.
i want an effiecient and reliable bov and wastegate. but a budget of 300 for both.
the turbo2 blew cause of no oil pressure.
questions are simple
if i use the t2 harness and ecu, will the rtek 7 (using the t2 ecu)work for it still. i am guessing yes cause you tune yourself right.
what wideband should i go with and can it work with the rtek. or should i go piggy back fuel control.
i am new with turbos, i am using the stock turbo until i learn more.
if i use the stock turbo, what exhaust size should i run, i work at CarX so i can build my own. should it be wide open or somewhat small.
i was also going to either top mount and have some kind of 02 cooler on it or front mount, using exhaust tubing.
i want an effiecient and reliable bov and wastegate. but a budget of 300 for both.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM