s4 to s5 harness swap . . . HELP!!!!
#1
Full Member
Thread Starter
s4 to s5 harness swap . . . HELP!!!!
well i have the s5 harness apart and exposed . . . im doing everything that is needed to be done to work on a jdm TII . . . now i just need help to make it work with an s4 body . . . i have everything striped and im just stumped . . . i think is the x-15 and x-16 . . .ooh and one more thing . . . do i have to use the s5 lower harness for the alt?? . . .
ps am i nutz or did i just see the crank angle sensor wires with the lower harness
hailers?? chris boots??? aaroncakes???? anyone wanna take this on and let me know wat i need to do and wat im missing
thank you so much frome your extra sm drifter
jay
ps am i nutz or did i just see the crank angle sensor wires with the lower harness
hailers?? chris boots??? aaroncakes???? anyone wanna take this on and let me know wat i need to do and wat im missing
thank you so much frome your extra sm drifter
jay
#2
RIP Mark
iTrader: (2)
What do you mean by lower harness? The front harness (comes through firewall on the drivers side and wraps around the front)?
If so, the electrical harness can be separated from the front harness.
I just completed an S4 to S5 swap. It's so much easier to just swap everything S5 over than to try dealing with combining the two.
If so, the electrical harness can be separated from the front harness.
I just completed an S4 to S5 swap. It's so much easier to just swap everything S5 over than to try dealing with combining the two.
#3
^^I think he means the charging wiring harness that also includes the plug for the CAS, I did this swap using my n/a wiring harness with s4 t2 electronics. it was easier for me.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM