s4 and s5 fuel intector
#3
Wire monkey
Join Date: Nov 2006
Location: Camberley, Surrey, UK
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
S4 injectors are low impedance, so there is a resistor pack in the wiring harness. It's possible if you use the S5 harness for the injectors and then use the high impedance s5 injectors - the ECU will drive them just the same, and they are the same physical size.
Its a lot of work...
Its a lot of work...
#4
Lives on the Forum
iTrader: (7)
S4 injectors are low impedance, so there is a resistor pack in the wiring harness. It's possible if you use the S5 harness for the injectors and then use the high impedance s5 injectors - the ECU will drive them just the same, and they are the same physical size.
Its a lot of work...
Its a lot of work...
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM